TL Options/Accessories

Aluminum Crossbars

Available in both flat (pictured) and round construction, these bars offer an excellent, low friction, high strength alternative to standard plastic bars. Their bolt-in design offers maximum torsional stability, as well as quick and easy link access for installation and maintenance.
More >

Aluminum Lids

Armor plate style aluminum lids offer maximum protection against hot chips and heavy debris. Available in both easy access snap-in and heavy-duty bolted construction, armor plate lids are ideal for severe and challenging applications, such as machine tools, mills, and foundries.
More >

Cable/Hose Clamps

Cable/hose clamps are designed to extend cable and hose life by reducing strain relief in carrier applications. Gortrac standard and custom designs are available for fast and simple installation in virtually any application. Gortrac cable clamps can be integrated with cable carrier or used as stand alone for cable management. Clamps should be installed at both moving and stationary ends of a carrier (For high pressure hoses, please consult factory).
More >

Cable/Hose Sleeves

Cable/hose sleeves are a simple, reliable and cost-effective method for protecting dynamic cables and hoses, either in a carrier or by themselves. Sleeves are available with zippers or hook and loop fasteners for accessibility, in a wide variety of materials for diverse application requirements. Gortrac cable/hose sleeves offer:

More >

Guide Trough

Gortrac® Guide Troughs are an easy, cost-effective method for supporting plastic carrier systems in long travel applications.

• Available from stock

• Fast, easy assembly

• Designed for center mount, offset mount, or opposed travel

More >

Machined Bars

Machined bars are aluminum (pictured) or plastic block-style crossbars, custom-bored to your specific cable and hose diameters. Machined bars offer minimal wear, optimal placement, and ensure that each cable and hose rides the neutral axis of the carrier, prolonging jacket and conductor life.
More >

Plastic Crossbars

Plastic cross bars are a lightweight, easily-removable, low-cost option. Quick link cavity access is accomplished with the tip of a screw driver. Many models are available in either top and/or bottom link access. Also available as Snap-In (pictured above right) on some modular carriers.
More >

Rolling Carriage

Horizontal Dividers or Shelving Systems are used to stack layers of cables/hoses in individual vertical compartments. These dividers prevent cross over and the resulting entanglement, decrease cavity width by utilizing allowable vertical space, and provide optimal organization of cables and hoses in a carrier system. Vertical dividers are available as snap-in components or as modular units that are bored to your specifications.

• Lightweight: Reduced tow forces vs. conventional carriage systems

• Modular: Easy to add/remove length

• Easy assembly: most components are bolted together

• Quiet: Urethane wheels used for low noise

• Use with plastic or steel track

• Track drives/returns carriage without use of cable

• Self-guiding for travels under 50 feet. Guide channel required for travels over 50 feet

More >

Vertical Separators

Vertical separators snap into carrier cross bars to provide multiple compartments in a single link. Available in most carriers and in a variety of styles, including stationary and rolling designs, vertical separators can be installed every link, or staggered for economy. When sizing compartments, Gortrac recommends a safety factor of an additional 10% for cables and 20% for hoses.
More >

Window Extenders

When additional cavity height is required, window extenders are a quick and easy modification that provide extra interior space in many standard link sizes. Available in both standard and custom configurations, they utilize a variety of crossbar styles, including flat bar, round bar, and poly rollers (pictured).
More >